1. Home
  2. Analyzer
  3. Oxford Instruments X-MET5100 XRF Handheld Analyzer

Oxford Instruments X-MET5100 XRF Handheld Analyzer

Sell used Oxford Instruments X-MET5100 (XMET 5100) Handheld XRF Analyzer. Item is in Excellent working condition.

Condition: Used
$4,200

At the pull of a trigger, Oxford Instruments hand-held X-MET5100 X-ray fluorescence (XRF) analyzers deliver fast, highly accurate on-site sample screening and analysis.

X-MET5100 provide real-time data in seconds, for:

  • Ore exploration
  • On-site excavation control
  • Mine mapping
  • Process monitoring: concentrates, tailings etc.
  • Environmental control

What's more, X-MET enables precise portable GPS integration for real-time ore exploration and mine mapping.

Sale used Oxford Instruments X-MET5100 XRF Handheld Analyzer includes:

  • Oxford X-MET5100 handheld analyzer
  • Battery for X-MET5100
  • 9 pieces check Sample plates
  • Background plate
  • Pretec multi-card reader
  • 2 GB SD card
  • IPAQ PDA computer with stylus
  • PDA AC Adapter plug
  • AC adapter/Battery charger
  • Dock for X-met 5100
  • PDA USB /RS232 cable HP
  • (2) Kapton window kit
  • XLCS 2608 Li-ion Charger for X-MET 5100
  • User Manual
  • Calibration certificate
  • Hard carrying case

X-MET5100 XRF Analyzer Specifications

Analyzer
  • Hand-held EDXRF Analyzer
  • Oxford Instruments Silicon Drift (SDD) high resolution detector
  • 45 kV Rh target X-ray tube (max 50uA)
  • Automatic 5-position filter changer
  • Measurement spot size 9 mm
  • Operating temperature: -10 °C to +50 °C
Computer
  • HP PDA with Windows Mobile 5.0 OS
  • 128 MB Internal memory
  • Min. 1 GB Removable memory
  • Capable of holding > 100,000 results and spectra
  • Data transfer via supplied USB cable; IR; WiFi, Bluetooth
  • Touch-screen controlled graphical user interface (12 languages)
Calibrations
  • Fundamental parameter (FP) and empirical factory calibrations available for various applications: Metals, plastics, soil, solder, mining, precious metals etc.
  • Customer specific calibrations
Analytical range From Mg to U, up to 35 elements depending on calibration
Radiation Safety
  • Password protection
  • IR proximity sensor
  • Three failsafe warning lights
Batteries
  • Rechargeable, removable inside handle
  • Li-Ion batteries (Quantity 2)
  • Typical duty cycle: 6 hours of operation each. Continuous (tube on) measurement: 3-4h.
  • 110/230V 50/60 Hz battery charger, including AC adaptor.
Reliability
  • CE and cCSAus approved
  • IP54 (NEMA 3) Splash/dust proof
Dimensions 9 x 30 x 27 cm
Weight 1.7 kg with battery and PDA installed

Rugged and reliable tool for fast analysis

  • Withstands all weather conditions and rough treatment
  • IP54 (NEMA 3) approved. Superior dust and moisture protection
  • High-strength environmentally sealed housing
  • Long battery operating time, charge indicator on battery and user interface

High performance

  • Single-shot analysis of all important elements in ore exploration: Fe, Cu, Cr, Zn, Pb, Mn, Ni, Co, Mo, Ta, W etc.
  • Al, Si, P, S analysis of prepared samples. No need for vacuum or He attachments! (X-MET5100)
  • Advanced automatic matrix correction
  • Rapid analysis with typical measurement times of  2 – 5 seconds (X-MET5100) depending on the elements of interest and required precision
  • Low detection limits, X-MET5100 can typically detect 5 – 30 ppm concentration with 120s measuring time. X-MET5100 detection limits are even lower and ppm level analysis can be done in just 10 – 30 seconds
  • High speed automatic averaging – calculate averages of 2 – 50 measurements and save both individual results and average results in a log file

Sample measurement is fast and simple

  • Direct on-site surface measurement for quick pre-screening without sample preparation
  • Laboratory grade analysis from a plastic bag or sample cup in bench-top mode