1. Home
  2. Analyzer
  3. Tektronix DPO5204 Digital Phosphor Oscilloscope

Tektronix DPO5204 Digital Phosphor Oscilloscope

Sell used Tektronix DPO5204 4 + 16 Ch 2 GHz 10 GS/s Digital Phosphor Oscilloscope. Operating System Upgraded to Windows 10, running on a 500 GB Solid State Drive (vs Windows 7 on 160 GB). Both Drives are provided.

Condition: Used
$9,700

Key Performance Specifications

  • 2 GHz Bandwidth Models
  • Up to 10 GS/s Real-time Sample Rate on One or Two Channels and up to 5 GS/s on All Four Channels
  • Up to 250 Megapoint Record Length with MultiView Zoom™
  • >250,000 wfms/s Maximum Waveform Capture Rate with FastAcq™
  • FastFrame Segmented Memory Acquisition Mode with >310,000 Frames per Second Capture Rate
  • Standard Passive Voltage Probes with Less than 4 pF Capacitive Loading and 500 MHz or 1 GHz Analog Bandwidth
  • User-selectable Bandwidth Limit Filters for Better Low-frequency Measurement Accuracy
  • Suite of Advanced Triggers

Ease-of-Use Features

  • Wave Inspector® Controls provide Easy Navigation and Automated Search of Waveform Data
  • MyScope® Custom Control Windows and Right Mouse Click Menus for Exceptional Efficiency
  • 53 Automated Measurements, Waveform Histograms, and FFT Analysis for Simplified Waveform Analysis
  • TekVPI® Probe Interface supports Active, Differential, and Current Probes for Automatic Scaling and Units
  • 10.4 in. (264 mm) Bright XGA Display with Touch Screen
  • Small Footprint and Lightweight – Only 8.12 in. (206 mm) Deep and Less than 15 lb. (6.7 kg)

Connectivity

  • Two USB Host Ports on the Front Panel and Four on the Rear Panel for Quick and Easy Data Storage, Printing, and Connecting USB Peripherals
  • USB Device Port on the Rear Panel for Easy Connection to a PC or GPIB Control with an Adapter
  • Integrated 10/100/1000BASE-T Ethernet Port for Network Connection and Video Out Port to Export the Oscilloscope Display to a Monitor or Projector
  • Microsoft® Windows 7 64-bit Operating System for Easy Connectivity and Integration into Your Environment
  • LXI Class C Compliant

Mixed Signal Design and Analysis (MSO Series)

  • Automated Triggering and Decode on Parallel Buses
  • Per-channel Threshold Settings
  • MagniVu™ High-speed Acquisition provides 60.6 ps Fine Timing Resolution on Digital Channels

Optional Serial Triggering and Analysis

  • Automated Serial Triggering and Decode Options for I2C, SPI, RS-232/422/485/UART, and USB
  • Automated Serial Decode and Vehicle Network Monitoring of CAN and LIN

Optional Technology Specific Analysis

  • Software Solutions provide Built-in Domain Expertise for Ethernet and USB 2.0 Compliance Testing, Jitter, Timing, Eye Diagrams, Power, and DDR Memory Bus Analysis
  • Limit and Mask Testing provide Quick Insight into Signal Characteristics


 

Tektronix DPO5204 Specification

Input Channels 4
Analog Bandwidth (–3 dB) 2 GHz
Maximum Sample Rate (1 or 2 channels) 10 GS/s
Rise Time 175 ps
DC Gain Accuracy ±1.5%, derated at 0.10%/°C above 30 °C
Bandwidth Limits Depending on instrument model: 1 GHz, 500 MHz, 350 MHz, 250 MHz, and 20 MHz
Input Coupling AC, DC
Input Impedance 1 MΩ ±1%, 50 Ω ±1%
Input Sensitivity 1 MΩ : 1 mV/div to 10 V/div
50  Ω : 1 mV/div to 1 V/div
Vertical Resolution 8 bits (11 bits with Hi Res)
Max Input Voltage, 1 MΩ
  • 300 VRMS CAT II, with peaks ≤ ±425 V
  • For <100 mV/div derate at 20 dB/decade above 100 kHz to 30 VRMS at 1 MHz, 10 dB/decade above 1 MHz
  • For ≥100 mV/div derate at 20 dB/decade above 3 MHz to 30 VRMS at 30 MHz, 10 dB/decade above 30 MHz
Max Input Voltage, 50 Ω 5 VRMS, with peaks ≤ ±20 V
Position Range ±5 divisions
Delay between any Two Channels (Typical) ≤100 ps (50 Ω, DC coupling and equal V/div at or above 10 mV/div)
Offset Range 1 mV/div - 50 mV/div 1 MΩ : ±1 V
50 Ω : ±1 V
50.5 mV/div - 99.5 mV/div 1 MΩ : ±0.5 V
50 Ω: ±0.5 V
100 mV/div - 500 mV/div 1 MΩ: ±10 V
50 Ω: ±10 V
505 mV/div - 995 mV/div 1 MΩ: ±5 V
50 Ω: ±5 V
1 V/div - 5 V/div 1 MΩ: ±100 V
50 Ω: ±5 V
5.05 V/div - 10 V/div 1 MΩ: ±50 V
50 Ω: NA
Offset Accuracy ±(0.005 × |offset – position| + DC Balance)
Note: Both position and constant offset term must be converted to volts by multiplying by the appropriate volts/div term
Channel-to-Channel Isolation (Any two channels at equal Vertical Scale settings) (Typical) ≥100:1 at ≤100 MHz and ≥30:1 at >100 MHz up to the rated BW
Options
  • 10RL: 125 Meg Max 125M/Ch
  • MTM: Serial Mask Testing
  • ASM: Advanced Search and Mark
  • LT: Limit Test
  • SR-EMBD: Embedded Serial Triggering and Analysis (I2C, SPI)
  • MSOE: 16 Channel MSO
  • SR-COMP: Computer Serial Triggering and Analysis
  • SR-USB: USB Serial Triggering and Analysis
  • SR-DPHY: MIPI D-PHY (DSI1/CSI2) Serial Analysis
  • SR-810B: 8B/10B Serial Analysis
  • VET: Visual Trigger and Search
  • SR-CUST: Custom Serial Analysis
  • SR-AUTO: Automotive Serial Trigger and Analysis (CAN/LIN/FlexRay)
  • SR-PCIE: PCI Express Serial Analysis
  • SR-AERO: MIL-STD-1553 Serial Triggering and Analysis
  • SR-ENET: Ethernet Triggering and Analysis
  • TekExpress-BRR: BroadR-Reach (BRR) Automoated Compliance Solution software

Operating System Upgraded to Windows 10, running on a 500 GB Solid State Drive (vs Windows 7 on 160 GB). Both Drives are provided.
Software/firmware is updated to current and latest version. It does come in the Tek packaging/box and manual.

 

Includes:

 

Download
Tektronix DPO5204/MSO5204 Mixed Signal Oscilloscopes DataSheet.PDF