Fluke 810 Vibration Tester

Fluke 810 Vibration Tester with Tachometer Fluke-810T for sale. This unit is working and is in near pristine cosmetic condition.

Condition: Used
$3,800

The Fluke 810 Vibration Tester is the most advanced troubleshooting tool for mechanical maintenance teams who need an answer now. The unique diagnostic technology helps you quickly identify and prioritize mechanical problems, putting the expertise of a vibration analyst in your hands.

You take pride in your facility, your team, and your work. You do what it takes to keep things up and running, but sometimes there is not enough time or resources to keep up with the workload, let alone be proactive about mechanical maintenance. The Fluke 810 Vibration Tester puts you one step ahead by coupling a powerful diagnostic engine with a simple step-by-step process to report on specific machine faults and their severity the first time measurements are taken, without prior measurement history. Overall vibration measurements and spectral diagrams give technicians the ability to quickly asses overall machine health, while actionable recommendations give you the confidence you need to address critical problems first.
 

Use the Fluke 810 Vibration Tester to:

  • Troubleshoot problem equipment and understand the root cause of failure
  • Survey equipment before and after planned maintenance and confirm the repair
  • Commission new equipment and ensure proper installation
  • Provide quantifiable proof of equipment condition and drive investment in repair or replacement
  • Prioritize and plan repair activities and operate more efficiently
  • Anticipate equipment failures before they happen and take control of spare parts inventories
  • Train new or less-experienced technicians and build confidence and skill across the team


Specifications:

Diagnostic Specifications

Standard Faults Unbalance, looseness, misalignment and bearing failures
Analysis For

Motors, fans, blowers, belts and chain drives, gearboxes, couplings, centrifugal pumps, piston pumps, sliding vane pumps, propeller pumps, screw pumps, rotary thread/gear/lobe pumps, piston compressors, centrifugal compressors, screw compressors, closed coupled machines, spindles.

Motor Rotational Speed Range

200 rpm to 12000 rpm

Diagnosis Details Plain-text diagnosis, fault severity (slight, moderate, serious, extreme), repair details, cited peaks, spectra
MDI Software Provides user defined guided inspection Creates DICONDE compatible inspection files Creates MS Word™ compatible inspection reports

Electrical Specifications

Ranging Automatic
A/D Converter 4 channel, 24 bit
Usable Bandwidth 2 Hz to 20 kHz
Sampling 51.2 Hz
Digital Signal Processing Functions Automatically configured anti-alias filter, high-pass filter, decimation, overlapping, windowing, FFT, and averaging
Sampling Rate 2.5 kHz to 50 kHz
Dynamic Range 128 dB
Signal To Noise Ratio 100 dB
FFT Resolution 800 lines
Spectral Windows Hanning
Frequency Units Hz, orders, cpm
Amplitude Units in/sec, mm/sec, VdB (US), VdB* (Europe)
Non-volatile Memory SD micro memory card, 2 GB internal + user accessible slot for additional storage

General Specifications

Display ¼ VGA, 320 × 240 Color (5.7 inch diagonal) TFT LCD with LED backlight
Input/Output Connections Triaxial sensor connection: 4 pin M12 connector
Single axis sensor connection: BNC connector
Tachometer Connection: Mini DIN 6 pin connector
PC Connection: Mini B USB (2.0) connector
Battery Type: Lithium-ion, 14.8 V, 2.55 Ah
Charging time: 3 hours
Discharge time: 8 hours (under normal conditions)
AC Adapter Voltage: 100 VAC to 240 VAC
Frequency: 50/60 Hz
Operating System WinCE 6.0 Core
Language Support English, French, German, Italian, Japanese, Portuguese, Simplified Chinese, Spanish
Dimensions (H x D x W) 18.56 x 7.00 x 26.72 cm
Weight 1.9 kg (With Battery)

Environmental Specifications

Operating Temperature 0°C to 50°C (32°F to 122°F)
Storage Temperature -20°C to 60°C (-4°F to 140°F)
Operating Humidity 10% to 95% RH (non-condensing)
Electromagnetic Compatibility EN 61326-1:2006, EN 61010:1:2001 2nd ed.

Sensor Specifications

Sensor Type Accelerometer
Sensitivity 100 mV/g (±5%, 25°C)
Acceleration Range 80 g peak
Amplitude Nonlinearity 1%
Frequency Response Z: 2 - 7,000 Hz ±3dB
X, Y: 2 - 5,000 Hz ±3dB
Power Requirement (IEPE) 18 VDC to 30 VDC, 2 mA to 10 mA
Bias Output Voltage 12 VDC
Grounding Case grounded
Sensing Element Design PZT ceramic / shear
Case Material 316L stainless steel
Mounting 10-32 captive socket head screw, 2-pole rare earth magnet (48 lb pull strength)
Output Connector 4-Pin, M12
Mating Connector M12 - F4D
Non-volatile Memory TEDS 1451.4 compatible
Vibration Limit 500 g peak
Shock Limit 5000 g peak
Electromagnetic Sensitivity, Equivalent g 100 μg/gauss
Sealing Hermetic
Temperature Range -50°C to 120°C (-58°F to 248°F) ±7%

Included:

  • Fluke 810 Vibration Tester
  • Storage Case
  • Smart Battery Pack
  • Smart Battery Pack Charger
  • Shoulder Strap
  • 810T Non-Contact Tachometer & Pouch
  • Sensor
  • Sensor Magnet Mount
  • Sensor Quick Disconnect Cable
  • Sensor Mounting PadsMini USB to USB Cable
  • Getting Started Guide
  • Quick Reference Guide
  • User Documentation / Viewer Software CD-ROM